Tag: DS200CPCAG1ABB

As mentioned earlier, this DS200CPCAG1ABB printed circuit board product was manufactured for GE’s now obsolete Mark V legacy family of turbine control systems. The Mark V series of this DS200CPCAG1ABB printed circuit board, or PCB for short, is considered a traditional product family because it had to be discontinued for many years after its first release. While the larger Mark V series of this DS200CPCAG1ABB PCB is a legacy series, it is also one of the final in GE’s Mark product line, leveraging its patented Speedtronic control system technology. The technology was first released in the late 1960s along with the concept of the Mark I series. The DS200CPCAG1ABB PCB is defined in the original printed Mark V Series instruction manual material as a contactor navigation board, although the product initially developed with a specific functional role will be the DS200CPCAG1 parent contactor navigation board. However, the triple revision history of this DS200CPCAG1ABB PCB is missing, consisting of two functional product revisions and a single artwork configuration revision.

Hardware tips and specifications

As with any Mark V Series product offered to us for both new and refurbished stock, the contactor navigation board functionality of this DS200CPCAG1ABB PCB was introduced by accepting various functional induction hardware components in its components. The GE contactor navigation pad DS200CPCAG1ABB has one 12-pin connector and two 2-pin connectors. It also has 4 terminals and can connect up to 12 signal wires. The GE contactor navigation board DS200CPCAG1ABB also has a 24VDC 15A socket power relay. According to the original operating instructions of this DS200CPCAG1ABB device, the various contactor elements of this DS200CPCAG1ABB PCB have a specific coil voltage of 115 V dc. Given this specific voltage, the DS200CPCAG1ABB contactor navigation board is capable of converting the input 115 V AC voltage to 105 V DC voltage, applying the full voltage to close its contactor assembly. The high voltage used in the DS200CPCAG1ABB product assembly means that its contactors remain closed after the initial closure. Voltage regulation in the components of the DS200CPCAG1ABB Mark V Turbine Control System family is handled by the various voltage limiting hardware components that their components possess, including various rectifiers, capacitors and diodes. The components of this DS200CPCAG1ABB PCB have a thick normal style PCB surface coating, which enhances the damage to everyday wear.

There are moving parts inside the relay, so careful consideration is needed when installing the board in the driver. If the relay strikes the metal structure or other components in the drive cabinet, it is easily damaged. And the relay is tall, protruding from the surface of the plate and easy to hit. When sliding the board into the drive cabinet, ensure that you have a good view of the board and the interior of the cabinet. Slowly insert the board and align it with the screws on the rack. Insert the screw into the hole with one hand and turn the screwdriver with the other hand to secure the screw. However, do not damage the board by securing it so tightly that the screws will crack it. If the gasket is supplied or used on a defective circuit board, use a gasket. Then, unscrew the junction box and insert the wire into the corresponding terminal. Insert the wire into the terminal with one hand and tighten the terminal screw with the other hand. Hold the connector of the cable and plug it into the corresponding connector. Gently press them into the connector to ensure they are fully in place.

FAQ about DS200CPCAG1ABB
How to find capacitors on DS200CPCAG1ABB?
The capacitors of the DS200CPCAG1ABB are located in the center of the DS200CPCAG1ABB board. The capacitors on the DS200CPCAG1ABB are dark red.
How many amps does DS200CPCAG1ABB have?
The DS200CPCAG1ABB has 10 amps at 250 volts, and the DS200CPCAG1ABB has 10 amps at 30 volts.
What is the size of DS200CPCAG1ABB?
The DS200CPCAG1ABB measures 4 x 3.5 inches.