Call us 24/7+86 17359299796
My Header Store Notice
Call us 24/7+86 17359299796

Category: Industry trends

Home / Industry trends (Page 4)
GE IS200SAMBH1ABA Acoustic Monitoring Terminal Board for Mark VI and Mark VIe Systems
2025-01-13 BY
IN Industry trends

IS200SAMBH1ABA|Acoustic monitoring terminal board

What is involved in the conformal PCB coating style for the IS200SAMBH1A circuit board?

The conformal PCB coating of the IS200SAMBH1A device is a thin layer of full-surface PCB daily wear protection that is chemically applied to the entire substrate of the IS200SAMBH1A product.
Is the Class A feature product version of this IS200SAMBH1A device a common style for Mark VI series versions?

Yes. The Class A major feature version of the IS200SAMBH1A device is the most common product version in GE’s entire Mark product suite.
About IS200SAMBH1A
The IS200SAMBH1A is a PCB (printed circuit board) device manufactured by GE for its Mark VI and Mark VIe systems. These systems, released by GE, are designed to improve the efficiency of its gas and steam turbines through reliable management. Both are TMR (Triple Modular Redundancy) systems that allow multiple backups of critical control and protection parameters. This IS200SAMBH1A product may belong to the Mark VIe family and is an upgraded version of the previous Mark V series, as its possible applications also extend to alternative energy Settings for wind turbine gears. However, the IS200SAMBH1A product’s Mark VI turbine control system family still attracts some consistent demand in the current automation industry, as it is one of the final GE Mark product families to be developed utilizing patented Speedtronic control system technology. The technology was first introduced with the release of the Mark I and has remained so ever since.
GE IS200SAMBH1ABA Acoustic Monitoring Terminal Board for Mark VI and Mark VIe Systems

Hardware tips and specifications

The IS200SAMBH1A is an acoustic monitoring terminal board. The double terminal board adds 18 inputs to the acoustic monitoring system through 36 terminals located on the terminal block for connecting two-wire inputs. The board also has a terminal board with 36 terminal connections for adding 2-wire buffer outputs for a total of 18 outputs. These outputs typically monitor voltage signals. The IS200SAMBH1A is fitted with a passive electromagnetic interference (EMI) filter to prevent high-frequency noise from external sources. The IS200SAMBH1A design has an additional metal frame that surrounds all four edges of the PCB. The frame has multiple flanges, including a top hat flange placed along each long side of the board that has been drilled with mounting notches or holes. The board surface is marked with various codes, including FA/00. The board assembly and the aforementioned frame are connected via bracket and screw mounting. The board measures 9.1 “x 5.625”. Cooling is achieved by air convection. The IS200SAMBH1A is filled with many jumper switches. These are used to connect SigX lines to a constant current source. For more information about the board, its components, operation, and installation, please refer to the manufacturer’s User Guide and manual.

The IS200SAMBH1A product is a highly voltage-sensitive Mark VI series product, and by using the Mark VI series standardized voltage limiting hardware components and component specification selection, including different iterations of Mark VI Series capacitors, diodes, resistors, and finally integrated circuit components, The high-voltage intensive features of the Mark VI series have been enhanced. The above information on this IS200SAMBH1A personalized product page here does say more about the lack of original GE instruction manual materials available online for this IS200SAMBH1A device than it does about its true importance to the IS200SAMBH1A product. Given this identified lack of documentation, the IS200SAMBH1A product’s functional product number can actually be identified as the primary source of IS200SAMBH1A Board hardware component and component specification information, as it encodes relevant hardware information through a series of GE designed functional naming blocks. One of these blocks is the dual-function IS200 segment, which is indirectly responsible for describing the normal Mark VI series components of this IS200SAMBH1A product and its domestic original manufacturing location. Some other relevant hardware details stored in the IS200SAMBH1A functional product number include the following PCBS:

SAMB Functional Products Acronym
Conformal PCB coating style
The first group of Mark VI series products
Class A Functional Product revision

GE IS200SPROH1AAB Terminal Board for Mark VI Series Industrial Turbine Control Systems
2025-01-13 BY
IN Industry trends

IS200SPROH1AAB|Gas turbine circuit board module

The IS200SPROH1AAB-MRP663860 is a circuit board manufactured by GE primarily to replace components in its Speedtronic Mark system.

It acts as a digital signal processor control board and is available in a variety of versions.

The board consists of a variety of components from small to large, and the square design makes it easy to install and use.
GE IS200SPROH1AAB Terminal Board for Mark VI Series Industrial Turbine Control Systems

In addition, the board is used as a digital signal processor board in Mark VI systems with Ethernet-enabled tri-mode redundant control options, proprietary software such as CIMPLICITY, and a Windows-based operating system.

This makes it highly compatible and interoperable in industrial automation and process control systems.

GE IS230SNRTH2A, IS200SRTDH2ACB: Advanced RTD Input Module for Precision Temperature Measurement
2025-01-13 BY
IN Industry trends

IS200SRTDH2ACB|Mark VI series printed circuit boards

The IS200SRTDH2ACB is a simplex analog input terminal board manufactured and designed by General Electric as part of the Mark VIe family for distributed control systems. The simplex Analog Input (STAI) terminal board is a small analog input terminal board that can be connected to a battery pack and supports 10 analog inputs and 2 analog outputs. 2-wire, 3-wire, 4-wire, or transmitters with an external power supply can all be connected to 10 analog inputs. Two 0-20 mA 0-20 mA jumpers are available for configurable analog outputs, one of which supports 0-200 mA currents. The board is only available in simplex form. The terminal type is high-density Euro Block. The board is identified to the battery pack by an onboard ID chip for system diagnosis.
GE IS230SNRTH2A, IS200SRTDH2ACB: Advanced RTD Input Module for Precision Temperature Measurement

STAI installation:

A metal plate bracket mounted on the DIN rail carries the STAI along with the plastic insulator. STAI plus insulators can also be mounted on a metal plate assembly and then secured directly to the cabinet. There are two different types of Euro-block terminals available:

STAI 1 has a permanently mounted terminal with 48 terminals.
The right Angle joint on the STAI 2 accepts a variety of easily accessible pluggable terminals, with a total of 48 terminals.
Shielded twisted pair (#18 AWG) wire is usually used. There is an I/O cable shield terminal next to the terminal.
The following analog input and output types can be accepted:

Two-wire transmitter with analog input.
Three-wire transmitter with analog input.
Four-wire transmitter with analog input.
External powered transmitter with analog input.
Analog inputs, 5 V and 10 V DC.
0-20 mA current analog output.
Analog output, current 0-200 mA.

GE IS200TRLYH1BGF - Termination Relay Card for Mark VI Gasoline and Steam Turbine Controls
2025-01-13 BY
IN Industry trends

IS200TRLYH1BGF|Relay terminal boards used in Mark VI turbine control systems

The IS200TRLYH1B is a terminal relay card manufactured by GE for the Mark VI fan control system. This board is the “B” version of the TRLY terminal relay board and has the following characteristics:

Voting coil drive feedback
Socket type sealed mechanical relay
MOV inhibition
48 fence terminals
GE IS200TRLYH1BGF - Termination Relay Card for Mark VI Gasoline and Steam Turbine Controls
Physical description of IS200TRLYH1B:

The left edge of the IS200TRLYH1B contains two (2) large black terminals. Each terminal has twenty-four (24) silver metal terminals. There are forty-eight (48) terminals in total. Each terminal block is labeled with white lettering. Four (4) connector ports have been placed on the right bezel of the IS200TRLYH1B. Three (3) connector ports are aligned vertically at the edges, with the last one parallel to the connector port at the bottom. Near the center of the IS200TRLYH1B, there is a long row of white and black relays with cube-shaped transparent LIDS. These components have been connected to the PCB by black wire. Each relay has a round black transistor on either side. Paired with each transistor is a round red MOV or metal oxide varistor. Five (5) of these relays are arranged vertically on the top half of the IS200TRLYH1B. Five (5) additional relays have been aligned on the bottom half of the PCB.

GE IS200TSVCH2ADC MRP061873 - High-Performance Turbine Speed Control Board
2025-01-13 BY
IN Industry trends

IS200TSVCH2ADC|Analog input pad

The IS200VAICH1DAB model is manufactured by GE to simulate an input/output board system for TMR or simplex applications in the Mark V. When used in a TMR system configuration, the terminal board, TBAIH1C, or STAI board from the connection will fan out to three VME racks: T, R, and S, each containing a VAIC board. The output signal Board on the VAIC will be made up of proprietary circuits, using all available VAIC boards to create the required current. If there is any IS200VAICH1DAB model rack failure on the VME, the faulty VAIC model will be removed from the output and the rest of the VAIC board can continue to provide the correct current. When the model is configured for the simplex method, the connected terminal plates will feed into one of the VAIC models, thus providing all current to the output. In the operation of the IS200VAICH1DAB model, it will control four analog outputs and accept up to 20 analog inputs. This model has an analog multiplexer, A/D converter, D/A converter, and signal regulator. This model has two analog inputs, ± 1 mA or 4-20 mA, which are connected by a jumper terminal board. The analog output circuit is divided; Two outputs can be configured to be 0-200 mA or 4-20 mA, while the other outputs are only 4-20 mA. Both the input and output of this IS200VAICH1DAB model contain high suppression circuits that protect against high-frequency noise and surges. DAB module is a module for industrial automation and process control, with digital input/output and analog input/output functions. It can be connected to industrial controllers (such as PLCS) to implement various control logic and data processing functions.
GE IS200TSVCH2ADC MRP061873 - High-Performance Turbine Speed Control Board
The features of the IS200VAICH1DAB module are as follows:
High reliability: This module uses high-quality raw materials and advanced production processes, with reliability and stability, to ensure long-term stable operation. Multiple functions: This module has a variety of functions, such as digital input/output and analog input/output, to meet a variety of industrial automation and process control needs. Easy to configure and use: The module has a simple and easy-to-use configuration software and programming interface, making it easy for users to configure and use. Wide applicability: The module is suitable for various industrial automation and process control fields, such as power, chemical, pharmaceutical, etc.

GE IS200TSVCH2AED: Terminal Board for GE PLC Systems
2025-01-13 BY
IN Industry trends

IS200TSVCH2AED|Digital I/O module

MKVI includes an operating interface designed for personal computers with Microsoft Windows operating systems, which supports GE CIMPLICITY.
Graphics and General Electric Control System toolbox
IS200TSVCH2AED
Ethernet connectivity is achieved through socket connectors that allow the board to connect to other Mark VI, Mark VIe, or EX2100 excitation controllers.
And maintain and operate station interface GE IS200TSVCH2AED fan control module
GE IS200TSVCH2AED: Terminal Board for GE PLC Systems

The GE IS200TSVCH2AED is an analog input module commonly used in industrial automation and control systems. Here is some basic information about this module:
Manufacturer: General Electric (GE) is a global industrial conglomerate that offers a wide range of industrial automation and control system products.
Model: IS200TSVCH2AED is the model number or model code for this analog input module. This model is often used to uniquely identify this particular module.
Analog input module: Analog input module is a part of industrial automation system for receiving and processing analog signals. These signals usually represent continuous changes, such as temperature, pressure, flow rate, voltage, etc.
Function: The main function of this module is to receive, measure and process analog input signals. This allows them to monitor multiple analog signals simultaneously.

GE FANUC IC693MDL753: High-Performance 32 Channel 24 Volt Output Module
2025-01-10 BY
IN Industry trends

IC693MDL753H|90-30 series positive logic discrete output module

Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Series Series 90-30
Part number IC693MDL753
Product description Discrete output module
Product description Discrete output module
Product Type Digital I/O
Number of channels 32 (32)
Nooooo. Number of output groups four (4)
GE IC693MDL753H Output Module: Advanced Control Solutions for Industrial Automation

The IC693MDL753 is a digital output module of the 90-30 series Programmable Logic Controller (PLC) series. The module has thirty-two (32) positive logic output channels that produce an output voltage range of 102-28.8 with a nominal voltage of 12-24 VDC. The IC693MDL753 was previously manufactured by GE Fanuc Automation and has now been acquired by Emerson Automation. The module comes specifically with output groupings, four (4) groups of eight (8) outputs each. Each output group has a voltage of 250 volts and 100 volts between the field side and the logical side or optical isolation. The IC693MDL753 has an output current rating of 0.5 amps per point, with a maximum of 4 amps per group and 3 amps per group of common pins. It produces a surge current of 5.4 amps for 10 milliseconds while the on-voltage drops to 0.3 VDC. The off state leakage current is 0.1 mA, while the on and off response time, which is typical for the conversion of two signals, is 0.5 ms. The IC693MDL753’s internal power consumption is 260 mA from a 5-VDC backplane. The IC693MDL753 is compatible for use as both local and distributed I/O modules. It can be installed in any available slot in the chassis, except for specified CPU, communication adapter, and dedicated module slots. The IC693MDL753 occupies one slot and can be installed in as many slots as required, which is limited by the I/O capacity and memory of the host controller. To connect electrical loads to this discrete output module, the IC693CBL315 recommended manufacturer’s cable assembly.

The IC693MDL753 I/O module is a 32-point digital I/O module. The IC693MDL753 I/O module was developed by GE Fanuc for the 90-30 series of GE programmable logic controllers or PLCS. When using the 5-volt DC voltage supplied by the PLC backplane, the module has a peak current consumption rating of 260 mA. When each output point is ON, it consumes 16 mA of current, and the LED indicator at each output point consumes 4.7 mA of current. The 32 points were arranged into four groups of eight outputs each. When operating at 24 volts DC, each set of points consumes 16.5 milliamps of current when all eight outputs in the group are ON. When operating at 12 volts DC, each group consumes 9.6 mah of current when all eight outputs in the group are on. The inrush current of the IC693MDL753 I/O module is 5.4 amps. Both the on-off response time and the turn-off response time are 0.5 ms. The maximum output current of each point is 0.5 amps, and the maximum output current of each group is 4 amps. The output voltage range of the IC693MDL753 I/O module is 10.2 to 28.8 volts DC. The output on the module is positive logic output. The output switches the load on the positive side of the power supply and provides current to the load. Each set of output points can be used for different loads. The optocoupler provides isolation between the logical side and the field side of the IC693MDL753 I/O module. When the PLC’s CPU stops, all module outputs are forced into the OFF state. The connection to the output circuit is made through two 24-pin male connectors on the front of the module.

GE IC693MDL730: High-Performance Output Module for Industrial Automation
2025-01-10 BY
IN Industry trends

IC693MDL730|90-30 12/24 VDC positive logic Output module

Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part number IC693MDL730
Series Series 90-30
The life cycle status is positive
Part number IC693MDL730
Power Supply Type DC
Product description Discrete output module
Output power voltage 12 to 24 VDC
Number of channels eight (8), single group
GE IC693MDL730: High-Performance Output Module for Industrial Automation

The IC693MDL730 is a positive logic output module in the GE Fanuc 90-30 series Programmable Logic controller (PLC) product family, now part of Emerson Automation. The module has eight (8) discrete output channels in a single set, providing an output voltage range of 12-24 VDC with a ripple of +20%, -15%. Each channel provides an output current of 2 amps per point; 60 amps per fuse at 2 ° C; 50 amps per fuse at 4 degrees Celsius. The IC693MDL730 has a 1500 volt isolation between the field side and the logical side. The output channel has a surge current rating of 9.4 amps for 10 milliseconds; The maximum output voltage drop is 12 volts; The maximum off state leakage current is 1 mA, and the typical on and off response time for each transition is 2ms. The module occupies a slot in a 90-30 backplane and is compatible with any I/O slot in a 90-30 series five (5) or ten (10) backplane. When all outputs are energized, it consumes 55 mA of current from the 5 VDC bus located on the backplane. The IC693MDL730 is compatible with a wide range of electrical loads, especially motor starters, solenids and indicators. An external power supply must be connected to the module to provide operating power. The status LED indicator is installed on the front panel of the module and includes a fuse indicator, a module failure indicator, and eight (8) channel indicators assigned to each output channel that describe the operating status of each output point. The module comes with a detachable terminal board to simplify maintenance.

The IC693MDL730 PLC module has a 12 to 24 volt DC voltage rating with positive logic and 2 amp output current. The component has a DC power supply and comes with 8 points. The device has a load current of 2 amps per point, while response times are rated at 2 ms on and 2 ms off. The output type is transistor output, and the module has positive polarity. The connector type is the terminal with 20 screws that comes with the module.

GE FANUC IC693DNM200: Industrial Ethernet DeviceNet Module for Advanced Automation
2025-01-10 BY
IN Industry trends

IC693DNM200|Can handle 255 input data bytes and 255 output data bytes

Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part number IC693DNM200
Product Description DeviceNet master station module
Compatibility 90-30 series, PACSystems RX3i
Communication port one (1) DeviceNet terminal; One (1) service port
Supported network DeviceNet device network
Communication speed 125K, 250K and 500K
Data rates of 125K, 250K and 500K baud are supported
Module Position Any slot in Series 90-30 other than slots 0 and 1
GE FANUC IC693DNM200: Industrial Ethernet DeviceNet Module for Advanced Automation

IC693DNM200 is a main DeviceNet module. The module is a single-slot communication module that is part of the 90-30 series Programmable Logic Controller (PLC) platform formerly manufactured by GE Fanuc and now owned by Emerson Automation. The module is equipped with a DeviceNet terminal. It also has one (1) RS232 9-pin Type D housing female port used as a module service port. The IC693DNM200 supports all data rates of the DeviceNet protocol, especially 125K, 250K and 500K transfer rates. Each slave master station can transmit up to 255 bytes of input data and 255 bytes of output data, and up to 3972 bytes of input data and 3972 bytes of output data can be transmitted to this master module. In addition, a total of 126 I/O connections can be established using this module, as it is able to communicate with up to 63 slave devices, each of which can be assigned a maximum of two (2) I/O stations. The module supports and configurable data connections that are polling, stroboscopic, cyclic or COS. The DeviceNet master module also supports explicit messages, unconnected message manager (UCMM), and one (1) proxy connections per slave cell. In addition, the module can operate in dual mode, acting as both master and slave stations. Failure behavior, especially during communication loss, can be configured to provide an acceptable system response in the event of the above errors. The module also comes with upgradeable firmware that allows module updates and bug fixes to be downloaded via the RS232 service port.

The IC693DNM200 module is the main DeviceNet module designed and manufactured by GE Fanuc. The unit is part of the 90-30 series, which has various integrated functions for messaging and data transfer applications. Most of these functions are automatic, and the unit works on a DeviceNet network that includes other devices and hosts. The IC693DNM200 module can be installed on the host of the 90-30 series or PACSystems RX3i systems, but is not suitable for remote or extended racks. The IC693DNM200 DeviceNet module has 32 output points and supports standard data rates of 125K, 250K and 500K baud. The outputs are arranged in groups of 4, each covering 8 points. The unit is rated at 12 to 24 volts DC (positive logic), and its backplane consumes 450 mA at 5 volts DC. The GE Series 90-30 DeviceNet IC693DNM200 module has an output current of 0.5 amps per point and a surge current of 5.4 amps for a duration of 10 milliseconds. For output currents, it should be noted that the limit output current for each group is 4 amps, while the output current for each group of common pins does not exceed 3 amps. In addition, the on-state voltage drops to 0.3 volts DC, while the on/off response time does not exceed 0.5 ms. The IC693DNM200 module is very reliable and can operate in a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). In addition to this, the device has a specified storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

GE IC693CPU374 Industrial Control Module
2025-01-10 BY
IN Industry trends

IC693CPU374|240KB embedded user memory with two (2) Ethernet communication ports

Brand GE Fanuc
Series Series 90-30
Part number IC693CPU374
I/O count 2048
Processor speed 133 megahertz
Register memory 240 KB
The power supply requires 7.4 watts at 5 volts DC
Floating point math, yes.
Processor Model Embedded 586
Serial port RS-485 (via power supply)
Ethernet port number 2
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
GE Fanuc IC693CPU374HW | PAC Systems RX3i | CPU Module

The IC693CPU374 is a GE Fanuc Programmable Logic controller (PLC) module in the 90-30 series. The module is a processor module for hosting user programs, executing logic, and exchanging management data with the processor via an embedded communication port.

IC693CPU374 can also be called controller. The controller has a built-in microprocessor with an embedded 586 processor and a processing speed of 133 MHz. Its typical scan rate is 0.15 ms per 1K Boolean contact logic. The controller module has a single slot width and can be installed into a 90-30 PLC rack.

The IC693CPU374 has 240KB of user memory. It has two (2) Ethernet communication ports, supports 10/100 Mbps transmission speed, and has automatic sensing function. These ports enable the controller to connect to an Ethernet network to communicate with programming workstations such as desktop or laptop computers, with human machine interface (HMI) and supervisory control and data acquisition (SCADA) systems, and with other processors for messaging functions. The controller can also communicate via the RS485 communication interface on the power supply, whether it is a standard power supply or a high-capacity power supply.

This controller accepts user programs developed using a variety of programming software applications, Examples include VersaPro version 2.03 or later, CIMPLICITY Machine Edition Logic Developer version 2.60 or later, and control software version 2.50 or later. When making online edits to the controller using an existing user program, use the same or later version of the same software.

Menu
Call us 24/7+86 17359299796

Search for products

Back to Top
Product has been added to your cart