Category: Company News

Ge’s IS200TBTCH1C printed circuit board product was originally designed and manufactured specifically for placing in its Mark VI turbine control system family. The IS200TBTCH1C device belongs to the Mark VI family, which should be indicated by its full extended product family name section, for a set of possible functional applications that exist specifically in the control and management systems of GE compatible gas, steam and wind turbine automatic drive components. Given that the Mark V series has not yet introduced alternative energy based wind turbine applications, this must be considered a greater functional advance than the previous industry-standard Mark V turbine control system series.

Hardware tips and specifications

The Thermocouple Input (TBTC) terminal board IS200TBTCH1C is part of the Mark VIe series produced by General Electric. The board will accept T, S, K, J and E main Type 24 thermocouple inputs. If this board is used with a PTCCH2 board in a simplex system, the board can accept three additional thermocouple inputs, labeled R, B, and N. There are two TBTC models, this model is IS200TBTCH1C indicating that it has two DC type connectors and is only used for simplex applications. The board will use two PTCC packages, thus allowing 24 inputs. The IS200TBTCH1C device here on the IS200TBTCH1C personalised product page is mainly reminiscent of a visual inspection of the IS200TBTCH1C product itself, due to the small amount of material available for its online instruction manual. Therefore, the IS200TBTCH1C functional product number itself is really a good source of IS200TBTCH1C Board hardware component and component specification information, as it encodes various related IS200TBTCH1C details through a series of continuous functional naming components. For example, the IS200TBTCH1C product number begins with a dual-function IS200 series label, which entrusting the normal Mark VI series components of the IS200TBTCH1C PCB and its domestic manufacturing location. Some of the other IS200TBTCH1C details embedded in this media include:

TBTC Functional Products Acronym
The first group of Mark VI series groups
Three resistant PCB coating
Grade C Functional Product revision
When connecting an IS200TBTCH1C board that is part of the Mark VIe series, the I/O package used is inserted directly into the TBTC Type J connector, and the cable required also depends on the level of redundancy required for the board. A feature of the board is that the thermocouple input on the board can be ungrounded or grounded. The input can be up to 984 feet from the turbine control panel. An I/O processor attached to the device performs analog-digital linearization and conversion of the individual thermocouple inputs. The thermocouple input of the IS200TBTCH1C board can support a wide input range from negative 8 volts to positive 45 volts. The board has a cold junction and can operate in a potential range of minus 22 degrees to 149 degrees Fahrenheit. Cold end or CJ signals can be monitored by entering the signal space.